Spray foam insulation and air sealing are smart investments for South Bend homeowners looking to improve energy efficiency, comfort, and home durability. Whether you're insulating an attic, sealing a crawl space, retrofitting walls, or upgrading a garage, metal building, or barndominium, pricing depends on several factors including project size, foam type, accessibility, and the scope of work. We're transparent about our pricing so you know exactly what to expect before we begin.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Attic Spray Foam Insulation | From $1.50/sq ft | South Bend attics battle lake-effect snow loads and ice dams that form when heat leaks through the roof deck. We seal the attic floor and spray foam along the roof deck to stop warm air from reaching the cold shingles. |
| Closed Cell Spray Foam Insulation | From $1.20/board ft | Closed cell spray foam holds up well in South Bend's full basements, which stay damp through the long heating season. It also adds an air barrier against drafts moving through old balloon-framed walls near Notre Dame. |
| Open Cell Spray Foam Insulation | From $0.55/board ft | Open cell spray foam fills wall cavities in Mishawaka's postwar ranches, cutting drafts from gaps at old top plates. The sound-dampening foam also softens noise while sealing the home against Michiana's cold winter air. |
| Wall & Injection Foam Insulation | From $2/sq ft | Wall injection foam suits the balloon-framed walls common in early-1900s South Bend homes near downtown. We drill small holes, inject foam, and patch the siding so heat stops escaping through open wall cavities. |
| Crawl Space Spray Foam Insulation | From $2,500 | A handful of homes in St. Joseph County sit over a crawl space that stays damp through the long heating season. Spray foam seals the walls and band joist area to block moisture and cut cold floors overhead. |
| Rim Joist & Band Joist Spray Foam | From $650 | Rim and band joists are a weak point in South Bend's full basements, where cold and moisture meet all winter. We foam this gap to stop drafts and block the moisture that drives the dew point inside the wall. |
| Garage Spray Foam Insulation | From $1,200 | Garages and shops across St. Joseph County face the same cold winters and lake-effect snow as the houses next to them. Spray foam on the walls and ceiling keeps a workshop usable through the long Michiana heating season. |
| Metal Building & Barndominium Spray Foam | From $1.75/sq ft | Metal buildings in St. Joseph County condense fast when humid summer air meets cool steel walls. Spray foam bonds directly to the steel panels to stop that condensation and add an insulating layer across the whole structure. |
| Commercial & New Construction Spray Foam | Free commercial estimate | Commercial builds across South Bend and Mishawaka need insulation sized to this area's long cold winters. We spray foam attics, walls, and roof decks from the inside during new construction or renovation work. |
| Insulation Removal | From $950 | Old, settled insulation in Mishawaka's postwar ranches leaves gaps at top plates that let heat escape all winter. We remove the old material so new spray foam can seal those gaps properly. |
| Insulation Replacement & Re-Insulation | From $2,800 | Replacing old insulation matters most in early-1900s South Bend homes, where open wall cavities bleed heat all season. We re-insulate with spray foam to close those cavities and hold heat through the long heating season. |
| Air Sealing | From $650 | Air sealing matters in South Bend, where stack effect pulls heated air up and out through attic penetrations. We seal those gaps with foam and caulk so the blower door test shows fewer air changes per hour. |
What Affects the Price
- Project Size and Square Footage : Larger projects typically have lower per-unit costs due to efficiency and material volume. A 1,000 sq ft attic will cost less per square foot than a 500 sq ft project.
- Foam Type (Closed Cell vs. Open Cell) : Closed cell foam is denser and more expensive (from $1.20/board ft) but offers superior air sealing and moisture resistance. Open cell foam is more affordable (from $0.55/board ft) and works well for interior applications.
- Accessibility and Existing Conditions : Hard-to-reach areas, low attic clearance, or existing insulation that requires removal adds labor time and cost. We assess your home's specific layout during the estimate.
- Insulation Removal and Preparation : If old insulation, debris, or contaminated materials need removal before spray foam application, this adds to the project cost. Removal services start at $950.
What's included
- Travel included across the South Bend area
- Professional labor & equipment
- Old insulation vacuumed out, bagged & hauled away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, call us at (574) 406-8438 with details about the area you want to insulate (attic, crawl space, walls, etc.), current insulation status, and any specific concerns like air leaks or moisture. Our team will schedule a free consultation to assess your home, measure the space, and discuss your goals. A detailed estimate will include labor, materials, removal costs (if needed), and cleanup.
Get an Instant Ballpark Estimate
Pick the job, tell us roughly how much surface has to be covered, and see the range we actually work in. No email wall, no waiting.
Tell us the area to cover and we'll send your free written estimate →
Indicative ranges only. Final pricing depends on the thickness and R-value specified, what has to come out first, access, and whether open or closed cell is the right product. Measured on site at the board foot. Minimum job charges apply on small jobs.